Next stepPrevious step
What do the LED lights mean?
Click each step to see the action. You can also click the picture or use the arrow keys.
- 1.
LED — Displays the status of the router. - 2. LED Off — No power.
- 3. LED Solid Red — Power on, no internet connection.
- 4. LED Solid Orange/Yellow — Factory reset in progress / firmware upgrade in progress / initial start-up.
- 5. LED Solid Blue — Firmware protection mode / fatal software or hardware error.
- 6.
LED — Displays the status of the broadband connection to the router. - 7. LED Off — No sync with exchange, no DSL connection detected.
- 8. LED Flashing Green — No sync with exchange, DSL connection detected, attempting to gain sync.
- 9. LED Solid Green — In sync with exchange.
- 10.
LED — Displays the status of the Internet connection to the router. - 11. LED Off — No PPP, not attempting to gain PPP.
- 12. LED Flashing Red — Sync detected, attempting to gain PPP (attempting to authenticate).
- 13. LED Solid Red — Connected, authentication has been denied (suspended, incorrect username/password).
- 14. LED Solid Green — Connected, authenticated successfully.
- 15. LED Flashing Green — Connected, authenticated successfully, data transferring to internet.
- 16.
Phone LED — Displays the status of the phone line in to the router. - 17. LED Off — Telephony is turned off.
- 18. LED Solid Green — Telephony is enabled.
- 19.
Wi-Fi/ Wireless LED — Display the status of the wireless network. - 20.Wi-Fi/ Wireless LED Off — Wi-Fi switched off.
- 21.Wi-Fi/ Wireless LED Solid green — Wi-Fi is switched on.
- 22.
WPS LED Orange — When WPS button is pressed. Orange indicates searching for connections via WPS. - 23.WPS LED Flashing Green — Flashing green indicates successful connection via WPS.
- 24.WPS LED Flashing Red — Flashing red indicates an unsuccessful connection via WPS.After an unsuccessful connection the LED will flash run and then turn off.