Broadband help

What do the LED lights mean?

1. status inline LED — Displays the status of the router.

2. status inline LED Off — No power.

3. status inline LED Solid Red — Power on, no internet connection.

4. status inline LED Solid Orange/Yellow — Factory reset in progress / firmware upgrade in progress / initial start-up.

5. status inline LED Solid Blue — Firmware protection mode / fatal software or hardware error.

6. bb inline LED — Displays the status of the broadband connection to the router.

7. bb inline LED Off — No sync with exchange, no DSL connection detected.

8. bb inline LED Flashing Green — No sync with exchange, DSL connection detected, attempting to gain sync.

9. bb inline LED Solid Green — In sync with exchange.

10. www inline LED — Displays the status of the Internet connection to the router.

11. www inline LED Off — No PPP, not attempting to gain PPP.

12. www inline LED Flashing Red — Sync detected, attempting to gain PPP (attempting to authenticate).

13. www inline LED Solid Red — Connected, authentication has been denied (suspended, incorrect username/password).

14. www inline LED Solid Green — Connected, authenticated successfully.

15. www inline LED Flashing Green — Connected, authenticated successfully, data transferring to internet.

16. phone inlinePhone LED — Displays the status of the phone line in to the router.

17. phone inline LED Off — Telephony is turned off.

18. phone inline LED Solid Green — Telephony is enabled.

19. wifi inlineWi-Fi/ Wireless LED — Display the status of the wireless network.

20. wifi inlineWi-Fi/ Wireless LED Off — Wi-Fi switched off.

21. wifi inlineWi-Fi/ Wireless LED Solid green — Wi-Fi is switched on.

22. wps inlineWPS LED Orange — When WPS button is pressed. Orange indicates searching for connections via WPS.

23. wps inlineWPS LED Flashing Green — Flashing green indicates successful connection via WPS.

24. wps inlineWPS LED Flashing Red — Flashing red indicates an unsuccessful connection via WPS.

After an unsuccessful connection the LED will flash run and then turn off.