Click each step to see the action. You can also click the picture or use the arrow keys.

  • 1. status inline LED — Displays the status of the router.
  • 2. status inline LED off — No power.
  • 3. status inline LED Solid Green — Connected no errors.
  • 4. status inline LED Solid Red — Power on, no internet connection.
  • 5. status inline LED Solid Orange/Yellow — Factory reset in progress / firmware upgrade in progress / initial start-up.
  • 6. status inline LED Solid Blue — Firmware protection mode / fatal software or hardware error.
  • 7. bb inline LED — Displays the status of the broadband connection to the router.
  • 8. bb inline LED off — No sync with exchange, no DSL connection detected.
  • 9. bb inline LED Flashing Green — No sync with exchange, DSL connection detected, attempting to gain sync.
  • 10. bb inline LED Solid Green — In sync with exchange.
  • 11. www inline LED — Displays the status of the Internet connection to the router.
  • 12. www inline LED Off — No PPP, not attempting to gain PPP.
  • 13. www inline LED Flashing Green — Service is online and connected.
  • 14. www inline LED Flashing Red — Sync detected, attempting to gain PPP (attempting to authenticate).
  • 15. www inline LED Solid Red — Connected, authentication has been denied (suspended, incorrect username/password).
  • 16. wifi both inlineWi-Fi LEDs — Display the status for each frequency of the wireless network.
  • 17. wifi both inlineWi-Fi LEDs Off — Wi-Fi switched off.
  • 18. wifi both inlineWi-Fi LEDs Solid Green — Wi-Fi switched on.
  • 19. wifi both inlineWi-Fi LEDs Flashing Green — Wi-Fi switched on, data transferring .
  • 20. wps inlineWPS LED — Displays the status of the WPS on the router.
  • 21. wps inlineWPS LED Flashing Orange — When WPS button is pressed. Flashing orange indicates searching for connections via WPS.
  • 22. wps inlineWPS LED Flashing Green — Flashing green indicates successful connection via WPS.
  • 23. wps inlineWPS LED Flashing Red — Flashing red indicates an unsuccessful connection via WPS.
    After an unsuccessful connection the LED will flash run and then turn off.
  • 24. ethernet inlineEthernet LED — Displays the status of Ethernet connected devices to the router.
  • 25. ethernet inlineEthernet LED Off — No devices connected via Ethernet.
  • 26. ethernet inlineEthernet LED Solid Green — Device connected via Ethernet.
  • 27. ethernet inlineEthernet LED Flashing Green — Device connected via Ethernet and data transferring.
  • 28. tv inlineTV LED — Not in use.
  • 29. wifi 2 inlineWireless Power LED Solid Green — Wi-Fi switched on
  • 30. wifi 2 inlineWireless Power LED Off — Wi-Fi switched off.
  • 31. wifi 2 inlineWireless Power LED Solid Green — Wi-Fi switched on