Click each step to see the action. You can also click the picture or use the arrow keys.

  • 1. This guide shows the connection of an Analogue telephone to the router. If you are connecting a normal analogue phone, please see the Connect a VoIP phone topic.
  • 2. Make sure that your Router is plugged in and the power is on.
  • 3. Make sure Status status inline, Broadband bb inlineand Internet lights www inlineare green.
  • 4. If you are setting up using an ONT, ensure the router is connected to the internet via the WAN connection on the router and ONT.
    For more information see the Quick Router Setup (Full Fibre) topic.
  • 5. To connect an analogue phone, plug the phone adapter into the desired green phone port.
  • 6. Connect the phone wire to the phone adapter. Your phone is ready to use.
    If the phone does not work automatically you may need to enable telephony on your router.
  • 7. To enable Telephony, open a web browser.
  • 8. Type http://192.168.1.1 into the address bar and press Enter on the keyboard to access the routerʼs settings.
  • 9. When you have Signed in (see the Topic “Log into the Router Management Interface”), click the OFF toggle in the Telephony panel.
  • 10. Telephony has been enabled.